Wouldn’t it be nice to have an option of purchasing a shatterproof CFL light bulb, so in case the bulb breaks the mercury stays contained within the bulb? Even though Environmental Protection Agency issued a thorough clean up procedure for mercury spills including broken CFL bulbs, many consumers still have concerns with using CFL bulbs in their house. I happen to share this concern since I have a toddler, a dog, a cat and an oblivious husband!

So is there a solution?

Apparently there is a company called Shat-R-Shield, that takes ordinary CFL bulbs and coats them with plastic shatterproof coating. Sadly their focus market is only industrial, like food-processing facilities, laboratories, pharmaceutical manufacturing, and food serving facilities, like restaurants and food preparation places.

I happened to call them to see if it would be possible for someone like me to make a purchase from them and the response was no.  They only sell in bulk to distributors, who then sell directly to the industries above.

So I started pocking and prodding their website trying to understand why this is not yet available to the general public. Apparently, the disposal procedure is not as easy for the coated bulbs as for regular CFLs. Regular CFLs can be simply dropped off at the special recycling places. But the coated CFLs need to be stripped off of the protective coating before they can be recycled.  So you either do it yourself, or you find a  recycling company that will do it for you.  The charge varies based on the type of bulb, but most fall under a dollar per bulb.

I also didn’t happen to ask about the cost of bulbs when I called Shat-R-Shield. The cost of final product might be higher than the average consumer would be willing to pay.  But I can only speculate on this for now.

Related Articles

CFL Bulbs And Mercury

How Much Will I Save By Replacing Incandescent With CFL Light Bulbs

Many have concern with using CFL light bulbs because of the mercury found inside the bulb. CFL bulbs contain about 3.5-5 milligrams of mercury. Mercury is used to ignite the phosphorus particles inside the bulb in order to create the light.

But when looking at it objectively, what carries a higher risk for the mercury exposure using CFL or incandescent lights?

The mercury is encapsulated in a small glass tube inside the bulb, and it’s not dangerous as long as the capsule stays whole.  Obviously accidents happen and light bulbs do break.  In this case mercury leaks out of the capsule.  If the bulb is off and cool when the capsule breaks, the mercury has ability to evaporate, but at a very slow pace. If you only have it sitting there exposed for a few minutes, the risk of exposure to airborne mercury is practically non-existent.   If the bulb is on or still hot while it breaks, some of the mercury will become airborne quicker because of high temperature inside the bulb.  In either case it is very important that you follow the proper guidelines on how to clean up broken CFL bulb.

If you are curious about how to clean up the mess after breaking CFL bulb, I found this step-by-step clean up procedure on Epa.gov:

Spills

What Never to Do with a Mercury Spill

• Never use a vacuum cleaner to clean up mercury (but see the “What to Do if a Fluorescent Light Bulb Breaks” section below for more specific instructions about vacuuming broken fluorescent light bulbs). The vacuum will put mercury into the air and increase exposure.
• Never use a broom to clean up mercury. It will break the mercury into smaller droplets and spread them.
• Never pour mercury down a drain. It may lodge in the plumbing and cause future problems during plumbing repairs. If discharged, it can cause pollution of the septic tank or sewage treatment plant.
• Never wash clothing or other items that have come in direct contact with mercury in a washing machine, because mercury may contaminate the machine and/or pollute sewage. Clothing that has come into direct contact with mercury should be discarded. By “direct contact,” we mean that mercury was (or has been) spilled directly on the clothing. For example:
  • if you broke a mercury thermometer and some of elemental mercury beads came in contact with your clothing, or
  • if you broke a compact fluorescent bulb (CFL) so that broken glass and other material from the bulb, including mercury-containing powder, came into contact with your clothing.

  You can, however, wash clothing or other materials that have been exposed to the mercury vapor from a broken CFL, like the clothing you happened to be wearing when you cleaned up the broken CFL, as long as that clothing has not come into direct contact with the materials from the broken bulb.

• Never walk around if your shoes might be contaminated with mercury. Contaminated clothing can also spread mercury around.

What to Do if a Fluorescent Light Bulb Breaks

Before Clean-up: Air Out the Room

• Have people and pets leave the room, and don’t let anyone walk through the breakage area on their way out.
• Open a window and leave the room for 15 minutes or more.
• Shut off the central forced-air heating/air conditioning system, if you have one.
• Keep the central heating/air conditioning system shut off and the window open for at least 15 minutes after vacuuming is completed.

Clean-Up Steps for Hard Surfaces

• Carefully scoop up glass pieces and powder using stiff paper or cardboard and place them in a glass jar with metal lid (such as a canning jar) or in a sealed plastic bag.
• Use sticky tape, such as duct tape, to pick up any remaining small glass fragments and powder.
• Wipe the area clean with damp paper towels or disposable wet wipes. Place towels in the glass jar or plastic bag.
• Do not use a vacuum or broom to clean up the broken bulb on hard surfaces.

Clean-up Steps for Carpeting or Rug

• Carefully pick up glass fragments and place them in a glass jar with metal lid (such as a canning jar) or in a sealed plastic bag.
• Use sticky tape, such as duct tape, to pick up any remaining small glass fragments and powder.
• If vacuuming is needed after all visible materials are removed, vacuum the area where the bulb was broken.
• Remove the vacuum bag (or empty and wipe the canister), and put the bag or vacuum debris in a sealed plastic bag.

Clean-up Steps for Clothing, Bedding and Other Soft Materials

• If clothing or bedding materials come in direct contact with broken glass or mercury-containing powder from inside the bulb that may stick to the fabric, the clothing or bedding should be thrown away. Do not wash such clothing or bedding because mercury fragments in the clothing may contaminate the machine and/or pollute sewage.
• You can, however, wash clothing or other materials that have been exposed to the mercury vapor from a broken CFL, such as the clothing you are wearing when you cleaned up the broken CFL, as long as that clothing has not come into direct contact with the materials from the broken bulb.
• If shoes come into direct contact with broken glass or mercury-containing powder from the bulb, wipe them off with damp paper towels or disposable wet wipes. Place the towels or wipes in a glass jar or plastic bag for disposal.

Disposal of Clean-up Materials

• Immediately place all clean-up materials outdoors in a trash container or protected area for the next normal trash pickup.
• Wash your hands after disposing of the jars or plastic bags containing clean-up materials.
• Check with your local or state government about disposal requirements in your specific area. Some states do not allow such trash disposal. Instead, they require that broken and unbroken mercury-containing bulbs be taken to a local recycling center.

Future Cleaning of Carpeting or Rug: Air Out the Room During and After Vacuuming

• The next several times you vacuum, shut off the central forced-air heating/air conditioning system and open a window before vacuuming.

Even if they are not broken, CFL lights also need to be properly disposed of because of mercury. Throwing used CFLs into regular garbage is irresponsible because of high toxicity of mercury and the disposal locations can be found at this EPA Website.

So what are the plus sides of using CFL lights?

They are more efficient than the incandescent lights. They use about a quarter of energy of incandescent lights, therefore you pay less money to your electric company!

Not too many people know this, but traces of mercury along with other air pollutants are released with burning of fossil fuel.  Fossil fuel (like coal) is used by the power plants to create electricity.  The airborne mercury settles in the areas surrounding the power plant and nearby bodies of water.  That’s how we and the environment around us end up being exposed to the mercury.  So the point is, CFL’s create only a quarter of emissions when compared to the incandescent lights, including mercury.

So, back to my original question: what carries a higher risk for the mercury exposure, using CFL or incandescent lights?

We are already suffering the consequences of industrial pollution, like mercury contaminated fish, acid rain, oil spills.  Then I start thinking about my daughter, her kids and the later generations.  What is Earth going to look like then?  If we keep up with the current pollution speed (and I mean all the countries put together), how healthy are our kids, grand-kids, etc. are going to be? What do we and they have to look forward to?

So CFL bulbs carry a slight risk of mercury exposure only if the bulb breaks.  But in the long run, by not using CFLs the exposure to mercury is certainly 4x higher in the form of air pollution from the power plants.

So I cast a vote of switching to CFL light bulbs because I like to save money and the planet! If you want to know how much money you will save on your electric bill by switching to CFL lights, check out my post How Much Will I Save By Replacing Incandescent With CFL Light Bulbs.

Everybody wins right?

It’s a hot topic of the day, should I go ahead and replace all my house lights with CFLs?  How much money will I have to spend upfront?  How much energy will I save a month?

Basically, is it worth doing?

This question is individual for every household.  Some households spend a lot of energy on lighting and some don’t.

Here is an example based on my home.  I estimated my monthly energy savings if I were to replace my incandescent bulbs with the CFL bulbs.  I’m not counting the existing fluorescent lights we use in the kitchen, since I’m not planning to replace them.

Here is what I did:

1. I checked out what wattage bulbs we use in our light fixtures throughout the house.
2. I estimated how many hours per week each light fixture is ON.
3. I used this conversion chart taken from www.energystar.gov to find what substitute CFL light bulbs I need.
   
4. I calculated how much money I would save on my monthly energy bill by replacing incandescent lights with the CFL lights.  Here are my findings:

You can create the same chart either by hand or by using my spreadsheet to estimate your savings.

Once you find out your energy savings, you can check out how much it would cost to replace the incandescent lights.  Walmart.com and lowes.com have large selections of CFL light bulbs.  I estimated that I would have to spend about $70 to replace all of my bulbs to CFLs.  I’m sure as the time passes they will get less expensive.

One thing to keep in mind is that CFL lights last longer than the incandescent lights.  It’s a definite saving!  I love this table I found, it summarizes all the important attributes of LED, incandescent and CFL lights.

My next-door neighbor invested in new LED (Light Emitting Diode) lights this Christmas season.    So I started thinking whether we should do the same.  I decided to do my own financial analysis comparing the initial cost, energy cost and the replacement cost between the two kinds of lights. By the way, the inspiration for this analysis came from Jessica Knows who is running a Nickelodeon Holiday Money Saving Contest for $500 Wal-Mart gift certificate.  (I hope I win!!)

First I evaluated how much money I would need to invest in the new LED Christmas lights.  We usually decorate the roof line on the front of our house with white icicle lights.  We use six strands of the incandescent lights which come in a set of 200 lights and are 9 feet in length.  Their cost is $10 at Wal-Mart.  I found a set of 70 LED lights that are 9 feet long for $16.

I use couple of strands of multi-colored mini lights on the bushes in the front of the house.  And the Christmas tree gets couple of strands as well.  The incandescent lights come in 51-foot strands and cost $10.  I found LEDs of the same kind that come in 24-foot strands and cost $16.  Looks like for each incandescent strand, I would have to purchase two LED strands.

So far I will have to invest $124 more up front for the LED lights.

Second, I looked at how much money I would have to spend on each kind for the energy use.  I found that if I run the lights for 6 hours per day, every day for six weeks, I would spend $17 on the incandescent lights and $2 on the LED lights.

Third I looked at how often I would have to replace the LED lights versus the incandescent lights.  LED lights manufacturers claim that they would last 50,000-100,000 hours.  Since I would only use my Christmas lights 250 hours per season, these LED lights should easily outlive me, my kids and possibly my grand kids.  On the other hand, I will have to replace the incandescent lights every five years.

Taking all of this into consideration, looks like the difference in initial investment for the LED lights will pay for itself within 5 years.  This graph shows how much money I would spend on each kind of Christmas lights within 10 years:

Looks like if I keep using the incandescent lights I would spend almost $500 in the next 10 years, and I would spend half of that using LED lights.  As this pattern continues, the difference will triple in 20 years and quadruple in 30 and so on.

So what am I going to do this year?

I decided to keep using the incandescent lights, since we already have them.  Investment of $224 on the LED lights is a little steep for me this season. But as my short-lived incandescent lights die off within the next couple of years, I will more likely replace them with the LED.  This will also give me some time to find out how my neighbor’s LED lights are holding on!